A significant portion of the work of developing and validating methods for volatile organic compound (VOC) sampling in workplace atmospheres involves the use of laboratory-generated atmospheres. The sample variability was evaluated from the dynamic atmosphere generation system used for VOC atmosphere generation and sampling. Characterization of the bias and variability of samples was done for a variety of atmospheres containing neat n-heptane and mixtures of VOCs sampled on activated coconut shell charcoal. Estimates of sampling variability ranged from 2% for neat n-heptane to 12% for a component in the 10 VOC mix. Sample variability increased for lower concentration samples and for mixtures of VOCs compared to single component atmospheres. This study can serve as a baseline for future atmosphere sampling experiments evaluating performance at lower concentrations and mixed VOC environments.

Rotary-type percussion dowel drilling machines, which drill horizontal holes in concrete pavement, have been documented to produce respirable crystalline silica concentrations above recommended exposure criteria. This places operators at potential risk for developing health effects from exposure. United States manufacturers of these machines offer optional dust control systems. The effectiveness of the dust control systems to reduce respirable dust concentrations on two types of drilling machines were evaluated under controlled conditions with the machines operating inside large tent structures in an effort to eliminate secondary exposure sources not related to the dowel-drilling operation. Area air samples were collected at breathing zone height at three locations around each machine. Through equal numbers of sampling rounds with the control systems randomly selected to be on or off, the control systems were found to significantly reduce respirable dust concentrations from a geometric mean of 54 milligrams per cubic meter to 3.0 milligrams per cubic meter on one machine and 57 milligrams per cubic meter to 5.3 milligrams per cubic meter on the other machine. This research shows that the dust control systems can dramatically reduce respirable dust concentrations by over 90% under controlled conditions. However, these systems need to be evaluated under actual work conditions to determine their effectiveness in reducing worker exposures to crystalline silica below hazardous levels.