Nitromethane is a volatile organic compound categorized as a Group 2B carcinogen by the International Agency for Research on Cancer. It has been detected in mainstream cigarette smoke, but few reliable methods have been reported for accurate quantification. We developed, a sensitive, selective, fully validated method for the targeted determination of nitromethane in mainstream tobacco smoke in ten U.S. domestic brands and two quality control materials (3R4F and CM6). The vapor phase portion of machine-generated cigarette mainstream smoke, under modified ISO 3308:2000 regime (ISO) and modified intense regime (HCI), from single cigarettes was collected using airtight polyvinylfluoride sampling bags. The bags' contents were extracted using methanol containing an isotopically labeled internal standard followed by gas chromatography-tandem mass spectrometry. This approach is sufficiently sensitive to measure nitromethane levels in the nanogram range, with a method limit of detection of 72.3 ng/cig. Within-product variability estimated from the replicate analysis of 10 products ranged from 4.6%-16.3% (n = 6) over the two different smoking regimes, and method reproducibility estimated from two products used as quality control materials (3R4F and CM6) yielded intermediate precision values ranging from 16.6 to 20.8% (n = 20). Under HCI, nitromethane yields in machine-generated cigarette smoke from ten different domestic cigarette products ranged from 3.2 to 12 μg/cig; under ISO yields ranged from 1.6 to 4.9 μg/cig under standardized smoking machine conditions. Nitromethane yields are related to both the smoke regime (blocking of vent holes, puff duration and puff volume) and the heterogeneity of tobacco mixtures. This method provides a selective and fully validated technique to accurately quantify nitromethane in mainstream cigarette smoke, with minimal waste generation. It is an improvement over previous methods with regards to specificity, throughput, and simplicity of the sample collection process.

Although 2-nitropropane is a potentially harmful compound present in cigarette smoke, there are few fully-validated, modern methods to quantitate it in mainstream cigarette smoke. We developed an isotope dilution gas chromatography-tandem mass spectrometry (ID-GC-MS/MS) method for the detection of 2-nitropropane in mainstream cigarette smoke. The vapor fraction of mainstream cigarette smoke was collected in inert polyvinyl fluoride gas sampling bags and extracted with hexanes containing isotopically labeled internal standard, then purified and concentrated via solid-phase extraction using a normal phase silica adsorbent and a 100% dichloromethane eluant. This method is sensitive enough to measure vapor phase 2-nitro-propane concentrations in the nanogram range, with a 19 ng per cigarette method limit of detection. Product variability estimated from the analysis of 15 cigarette products yielded relative standard deviations ranging from 5.4% to 15.7%, and estimates of precision from two quality control products yielded relative standard deviations of 9.49% and 14.9%. Under the Health Canada Intense smoking regimen, 2-nitropropane in machine-generated mainstream smoke from 15 cigarette products ranged from 98.3 to 363 ng per cigarette.

Nitrobenzene, a potentially harmful compound found in tobacco smoke, has been largely excluded from prior analysis due to difficulties with quantification. Quantifying harmful compounds in cigarette smoke is useful to compare products, to examine the impact of design parameters on delivery, and to help estimate exposures. A sensitive high-throughput method has been developed for quantifying nitrobenzene in machine-generated mainstream cigarette smoke using isotope dilution gas chromatography-tandem mass spectrometry (ID-GC-MS/MS). This method has sufficient sensitivity to measure vapor phase nitrobenzene concentrations in the low nanogram range, with a 418pg/cig method limit of detection. Precision estimates from two quality control cigarette products resulted in percent relative standard deviations of 11.5% and 14.9%; product variability estimates from 13 cigarette products resulted in percent relative standard deviations ranging from 2.8% to 16.9%. Nitrobenzene in the machine-generated, mainstream smoke from 15 cigarette products are reported and range from 18 to 38ng/cig under the Health Canada Intense smoking regimen.