Last data update: Jan 27, 2025. (Total: 48650 publications since 2009)
Records 1-29 (of 29 Records) |
Query Trace: Boots T[original query] |
---|
Personal protective equipment use by dairy farmworkers exposed to cows infected with highly pathogenic avian influenza A(H5N1) viruses - Colorado, 2024
Marshall KE , Drehoff CC , Alden N , Montoya S , Stringer G , Kohnen A , Mellis A , Ellington S , Singleton J , Reed C , Herlihy R . MMWR Morb Mortal Wkly Rep 2024 73 (44) 999-1003 The risk for transmission of highly pathogenic avian influenza A(H5N1) virus from dairy cows to humans is currently low; however, personal protective equipment (PPE) use during work activities on dairy farms has not been well described. PPE use can protect farmworkers when they are working with highly pathogenic avian influenza A(H5N1)-infected cows. The Colorado Department of Public Health and Environment (CDPHE) and the Colorado Department of Agriculture (CDA) offered PPE to all Colorado farms before or during an A(H5N1) outbreak in cows in 2024. CDPHE surveyed 83 dairy workers from three farms with a confirmed bovine A(H5N1) outbreak. Frequently reported farm worker activities included milking cows or working in the milking parlor (51%), cleaning cow manure (49%), and transporting cows (46%). Frequently reported PPE items available to workers before A(H5N1) outbreaks included gloves (88%), eye protection (e.g., safety glasses or goggles) (76%), rubber boots or boot covers (71%), and head covers (69%). N95 respirator use was low among workers who were exposed to ill cows after detection of A(H5N1) virus (26%). PPE use while working with ill cows increased a mean of 28% after detection of A(H5N1) virus on surveyed farms; use of eye protection while milking cows increased the most (40%). Public health PPE distribution, education, and collaboration with CDA might have increased PPE use on dairy farms with A(H5N1) virus-infected cows and mitigated risk for farmworkers acquiring A(H5N1) virus. |
Inconsequential role for chemerin-like receptor 1 in the manifestation of ozone-induced lung pathophysiology in male mice
Johnston RA , Pilkington AW , Atkins CL , Boots TE , Brown PL , Jackson WT , Spencer CY , Siddiqui SR , Haque IU . Physiol Rep 2024 12 (8) e16008 We executed this study to determine if chemerin-like receptor 1 (CMKLR1), a G(i/o) protein-coupled receptor expressed by leukocytes and non-leukocytes, contributes to the development of phenotypic features of non-atopic asthma, including airway hyperresponsiveness (AHR) to acetyl-β-methylcholine chloride, lung hyperpermeability, airway epithelial cell desquamation, and lung inflammation. Accordingly, we quantified sequelae of non-atopic asthma in wild-type mice and mice incapable of expressing CMKLR1 (CMKLR1-deficient mice) following cessation of acute inhalation exposure to either filtered room air (air) or ozone (O(3)), a criteria pollutant and non-atopic asthma stimulus. Following exposure to air, lung elastic recoil and airway responsiveness were greater while the quantity of adiponectin, a multi-functional adipocytokine, in bronchoalveolar lavage (BAL) fluid was lower in CMKLR1-deficient as compared to wild-type mice. Regardless of genotype, exposure to O(3) caused AHR, lung hyperpermeability, airway epithelial cell desquamation, and lung inflammation. Nevertheless, except for minimal genotype-related effects on lung hyperpermeability and BAL adiponectin, we observed no other genotype-related differences following O(3) exposure. In summary, we demonstrate that CMKLR1 limits the severity of innate airway responsiveness and lung elastic recoil but has a nominal effect on lung pathophysiology induced by acute exposure to O(3). |
Biological effects of diesel exhaust inhalation. III cardiovascular function
Krajnak K , Kan H , Thompson JA , McKinney W , Waugh S , South T , Burns D , Lebouf R , Cumpston J , Boots T , Fedan JS . Inhal Toxicol 2024 1-16 OBJECTIVE: Inhalation of diesel exhaust (DE) has been shown to be an occupational hazard in the transportation, mining, and gas and oil industries. DE also contributes to air pollution, and therefore, is a health hazard to the general public. Because of its effects on human health, changes have been made to diesel engines to reduce both the amounts of particulate matter and volatile fumes they generate. The goal of the current study was to examine the effects of inhalation of diesel exhaust. MATERIALS AND METHODS: The study presented here specifically examines the effects of exposure to 0.2 and 1.0 mg/m(3) DE or filtered air (6h/d for 4 d) on measures of peripheral and cardio-vascular function, and biomarkers of heart and kidney dysfunction in male rats. A Tier 2 engine used in oil and gas fracking operations was used to generate the diesel exhaust. RESULTS: Exposure to 0.2 mg/m(3) DE resulted in an increase in blood pressure 1d following the last exposure, and increases in dobutamine-induced cardiac output and stroke volume 1 and 27d after exposure. Changes in peripheral vascular responses to norepinephrine and acetylcholine were minimal as were changes in transcript expression in the heart and kidney. Exposure to 1.0 mg/m(3) DE did not result in major changes in blood pressure, measures of cardiac function, peripheral vascular function or transcript expression. DISCUSSION AND CONCLUSIONS: Based on the results of this study, we suggest that exposure to DE generated by a Tier 2 compliant diesel engine generates acute effects on biomarkers indicative of cardiovascular dysfunction. Recovery occurs quickly with most measures of vascular/cardiovascular function returning to baseline levels by 7d following exposure. |
Applied force alters sensorineural and peripheral vascular function in a rat model of hand-arm vibration syndrome
Krajnak K , Warren C , Xu X , Chapman P , Waugh S , Boots T , Welcome D , Dong R . J Occup Environ Med 2023 OBJECTIVE: This study described the effects of applied force (grip) on vascular and sensorineural function in an animal model of hand-arm vibration syndrome (HAVS). METHODS: Rat tails were exposed to 0, 2 or 4 newtons (N) of applied force 4 hr/day for 10 days. Blood flow and sensitivity to transcutaneous electrical stimulation and pressure were measured. RESULTS: Applied force increased blood flow but reduced measures of arterial plasticity. Animals exposed to force tended to be more sensitive to 250 Hz electrical stimulation and pressure applied to the tail. CONCLUSIONS: Effects of applied force on blood flow and sensation are different than those of vibration. Studies examining co-exposures to force and vibration will provide data that can be used to determine how these factors affect risk of workers developing vascular and sensorineural dysfunction (i.e., HAVS). |
Reduction of exposure to simulated respiratory aerosols using ventilation, physical distancing, and universal masking (preprint)
Coyle JP , Derk RC , Lindsley WG , Boots T , Blachere FM , Reynolds JS , McKinney WG , Sinsel EW , Lemons AR , Beezhold DH , Noti JD . medRxiv 2021 2021.09.16.21263702 To limit community spread of SARS-CoV-2, CDC recommends universal masking indoors, maintaining 1.8 m of physical distancing, adequate ventilation, and avoiding crowded indoor spaces. Several studies have examined the independent influence of each control strategy in mitigating transmission in isolation, yet controls are often implemented concomitantly within an indoor environment. To address the influence of physical distancing, universal masking, and ventilation on very fine respiratory droplets and aerosol particle exposure, a simulator that coughed and exhaled aerosols (the source) and a second breathing simulator (the recipient) were placed in an exposure chamber. When controlling for the other two mitigation strategies, universal masking with 3-ply cotton masks reduced exposure to 0.3–3 µm coughed and exhaled aerosol particles by > 77% compared to unmasked tests, whereas physical distancing (0.9 or 1.8 m) significantly changed exposure to cough but not exhaled aerosols. The effectiveness of ventilation depended upon the respiratory activity, i.e., coughing or breathing, as well as the duration of exposure time. Our results demonstrate that a combination of administrative and engineering controls can reduce personal inhalation exposure to potentially infectious very fine respiratory droplets and aerosol particles within an indoor environment.PRACTICAL IMPLICATIONSUniversal masking provided the most effective strategy in reducing inhalational exposure to simulated aerosols.Physical distancing provided limited reductions in exposure to small aerosol particles.Ventilation promotes air mixing in addition to aerosol removal, thus altering the exposure profile to individuals.A combination of mitigation strategies can effectively reduce exposure to potentially infectious aerosols.Competing Interest StatementThe authors have declared no competing interest.Funding StatementThis work was supported by the Centers for Disease Control and Prevention Emergency Operations Center.Author DeclarationsI confirm all relevant ethical guidelines have been followed, and any necessary IRB and/or ethics committee approvals have been obtained.YesThe details of the IRB/oversight body that provided approval or exemption for the research described are given below:Not ApplicableAll necessary patient/participant consent has been obtained and the appropriate institutional forms have been archived.YesI understand that all clinical trials and any other prospective interventional studies must be registered with an ICMJE-approved registry, such as ClinicalTrials.gov. I confirm that any such study reported in the manuscript has been registered and the trial registration ID is provided (note: if posting a prospective study registered retrospectively, please provide a statement in the trial ID field explaining why the study was not registered in advance).YesI have followed all appropriate research reporting guidelines and uploaded the relevant EQUATOR Network research reporting checklist(s) and other pertinent material as supplementary files, if applicable.YesThe datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request. |
Efficacy of universal masking for source control and personal protection from simulated cough and exhaled aerosols in a room (preprint)
Lindsley WG , Beezhold DH , Coyle J , Derk RC , Blachere FM , Boots T , Reynolds JS , McKinney WG , Sinsel E , Noti JD . medRxiv 2021 2021.04.21.21255880 Face masks reduce the spread of infectious respiratory diseases such as COVID-19 by blocking aerosols produced during coughs and exhalations (“source control”). Masks also slow and deflect cough and exhalation airflows, which changes the dispersion of aerosols. Factors such as the directions in which people are facing (orientation) and separation distance also affect aerosol dispersion. However, it is not clear how masking, orientation, and distance interact. We placed a respiratory aerosol simulator (“source”) and a breathing simulator (“recipient”) in a 3 m x 3 m chamber and measured aerosol concentrations for different combinations of masking, orientation, and separation distance. When the simulators were front-to-front during coughing, masks reduced the 15-minute mean aerosol concentration at the recipient by 92% at 0.9 and 1.8 m separation. When the simulators were side-by-side, masks reduced the concentration by 81% at 0.9 m and 78% at 1.8 m. During breathing, masks reduced the aerosol concentration by 66% when front-to-front and 76% when side-by-side at 0.9 m. Similar results were seen at 1.8 m. When the simulators were unmasked, changing the orientations from front-to-front to side-by-side reduced the cough aerosol concentration by 59% at 0.9 m and 60% at 1.8 m. When both simulators were masked, changing the orientations did not significantly change the concentration at either distance during coughing or breathing. Increasing the distance between the simulators from 0.9 m to 1.8 m during coughing reduced the aerosol concentration by 25% when no masks were worn but had little effect when both simulators were masked. During breathing, when neither simulator was masked, increasing the separation reduced the concentration by 13%, which approached significance, while the change was not significant when both source and recipient were masked. Our results show that universal masking reduces exposure to respiratory aerosol particles regardless of the orientation and separation distance between the source and recipient.Competing Interest StatementThe authors have declared no competing interest.Clinical TrialRegistration not requiredFunding StatementThis work was supported by the US Centers for Disease Control and Prevention (CDC).Author DeclarationsI confirm all relevant ethical guidelines have been followed, and any necessary IRB and/or ethics committee approvals have been obtained.YesThe details of the IRB/oversight body that provided approval or exemption for the research described are given below:IRB approval was not required for this study.All necessary patient/participant consent has been obtained and the appropriate institutional forms have been archived.YesI understand that all clinical trials and any other prospective interventional studies must be registered with an ICMJE-approved registry, such as ClinicalTrials.gov. I confirm that any such study reported in the manuscript has been registered and the trial registration ID is provided (note: if posting a prospective study registered retrospectively, please provide a statement in the trial ID field explaining why the study was not registered in advance).YesI have followed all appropriate research reporting guidelines and uploaded the relevant EQUATOR Network research reporting checklist(s) and other pertinent material as supplementary files, if applicable.YesExperimental data is available upon request. |
Face mask fit modifications that improve source control performance (preprint)
Blachere FM , Lemons AR , Coyle JP , Derk RC , Lindsley WG , Beezhold DH , Woodfork K , Duling MG , Boutin B , Boots T , Harris JR , Nurkiewicz T , Noti JD . medRxiv 2021 2021.09.16.21263642 BACKGROUND During the COVID-19 pandemic, face masks are used as source control devices to reduce the expulsion of respiratory aerosols from infected people. Modifications such as mask braces, earloop straps, knotting and tucking, and double masking have been proposed to improve mask fit. However, the data on source control are limited.METHODS The effectiveness of mask fit modifications was determined by conducting fit tests on human subjects and simulator manikins and by performing simulated coughs and exhalations using a source control measurement system.RESULTS Medical masks without modification blocked ≥56% of cough aerosols and ≥42% of exhaled aerosols. Modifying fit by crossing the earloops or placing a bracket under the mask did not increase performance, while using earloop toggles, an earloop strap, and knotting and tucking the mask increased performance. The most effective modifications for improving source control performance were double masking and using a mask brace. Placing a cloth mask over a medical mask blocked ≥85% of cough aerosols and ≥91% of exhaled aerosols. Placing a brace over a medical mask blocked ≥95% of cough aerosols and ≥99% of exhaled aerosols.CONCLUSION Fit modifications can greatly improve the performance of face masks as source control devices for respiratory aerosols.Competing Interest StatementThe authors have declared no competing interest.Funding StatementResearch was supported by the following sources: Centers for Disease Control and Prevention, National Institutes of Health R01 ES015022 (TRN) and WV-CTSI U54 GM104942-05.Author DeclarationsI confirm all relevant ethical guidelines have been followed, and any necessary IRB and/or ethics committee approvals have been obtained.YesThe details of the IRB/oversight body that provided approval or exemption for the research described are given below:WVU Protocol #: 2009119037All necessary patient/participant consent has been obtained and the appropriate institutional forms have been archived.YesI understand that all clinical trials and any other prospective interventional studies must be registered with an ICMJE-approved registry, such as ClinicalTrials.gov. I confirm that any such study reported in the manuscript has been registered and the trial registration ID is provided (note: if posting a prospective study registered retrospectively, please provide a statement in the trial ID field explaining why the study was not registered in advance).YesI have followed all appropriate research reporting guidelines and uploaded the relevant EQUATOR Network research reporting checklist(s) and other pertinent material as supplementary files, if applicable.YesData is available from research personnel upon request. |
Constant vs. cyclic flow when testing face masks and respirators as source control devices for simulated respiratory aerosols
Lindsley WG , Blachere FM , Derk RC , Boots T , Duling MG , Boutin B , Beezhold DH , Noti JD . Aerosol Sci Technol 2023 57 (3) 215-232 SARS-CoV-2 spreads by infectious aerosols and droplets from the respiratory tract. Masks and respirators can reduce the transmission of infectious respiratory diseases by collecting these aerosols at the source. The ability of source control devices to block aerosols can be tested by expelling an aerosol through a headform using constant airflows, which are simpler, or cyclic airflows, which are more realistic but require more complex methods. Experiments with respirators found that using cyclic vs. constant flows affected the amount of aerosol inhaled, but similar comparisons have not been made for source control devices with exhaled aerosols. We measured the collection efficiencies for exhaled aerosols for two cloth masks, two medical masks with and without an elastic mask brace, a neck gaiter, and an N95 filtering facepiece respirator using 15 L/min and 85 L/min constant and cyclic flows and a headform with pliable skin. The collection efficiencies for the 15 L/min cyclic flow, 15 L/min constant flow, and 85 L/min constant flow were not significantly different in most cases. The apparent collection efficiencies for the 85 L/min cyclic flow were artificially increased by rebreathing and refiltration of the aerosol from the collection chamber. The collection efficiencies correlated well with the fit factors (rho > 0.95) but not the filtration efficiencies (rho < 0.54). Our results suggest that the aerosol collection efficiency measurements of source control devices are comparable when testing the devices using either constant or cyclic airflows and that the potential for aerosol rebreathing must be considered when conducting experiments.Copyright © This work was authored as part of the Contributor's official duties as an Employee of the United States Government and is therefore a work of the United States Government. In accordance with 17 USC. 105, no copyright protection is available for such works under US Law. |
Melioidosis in Thailand: Present and Future
Hinjoy S , Hantrakun V , Kongyu S , Kaewrakmuk J , Wangrangsimakul T , Jitsuronk S , Saengchun W , Bhengsri S , Akarachotpong T , Thamthitiwat S , Sangwichian O , Anunnatsiri S , Sermswan RW , Lertmemongkolchai G , Tharinjaroen CS , Preechasuth K , Udpaun R , Chuensombut P , Waranyasirikul N , Anudit C , Narenpitak S , Jutrakul Y , Teparrukkul P , Teerawattanasook N , Thanvisej K , Suphan A , Sukbut P , Ploddi K , Sirichotirat P , Chiewchanyon B , Rukseree K , Hongsuwan M , Wongsuwan G , Sunthornsut P , Wuthiekanun V , Sachaphimukh S , Wannapinij P , Chierakul W , Chewapreecha C , Thaipadungpanit J , Chantratita N , Korbsrisate S , Taunyok A , Dunachie S , Palittapongarnpim P , Sirisinha S , Kitphati R , Iamsirithaworn S , Chaowagul W , Chetchotisak P , Whistler T , Wongratanacheewin S , Limmathurotsakul D . Trop Med Infect Dis 2018 3 (2) 38 A recent modelling study estimated that there are 2800 deaths due to melioidosis in Thailand yearly. The Thailand Melioidosis Network (formed in 2012) has been working closely with the Ministry of Public Health (MoPH) to investigate and reduce the burden of this disease. Based on updated data, the incidence of melioidosis is still high in Northeast Thailand. More than 2000 culture-confirmed cases of melioidosis are diagnosed in general hospitals with microbiology laboratories in this region each year. The mortality rate is around 35%. Melioidosis is endemic throughout Thailand, but it is still not uncommon that microbiological facilities misidentify Burkholderia pseudomallei as a contaminant or another organism. Disease awareness is low, and people in rural areas neither wear boots nor boil water before drinking to protect themselves from acquiring B. pseudomallei. Previously, about 10 melioidosis deaths were formally reported to the National Notifiable Disease Surveillance System (Report 506) each year, thus limiting priority setting by the MoPH. In 2015, the formally reported number of melioidosis deaths rose to 112, solely because Sunpasithiprasong Hospital, Ubon Ratchathani province, reported its own data (n = 107). Melioidosis is truly an important cause of death in Thailand, and currently reported cases (Report 506) and cases diagnosed at research centers reflect the tip of the iceberg. Laboratory training and communication between clinicians and laboratory personnel are required to improve diagnosis and treatment of melioidosis countrywide. Implementation of rapid diagnostic tests, such as a lateral flow antigen detection assay, with high accuracy even in melioidosis-endemic countries such as Thailand, is critically needed. Reporting of all culture-confirmed melioidosis cases from every hospital with a microbiology laboratory, together with final outcome data, is mandated under the Communicable Diseases Act B.E.2558. By enforcing this legislation, the MoPH could raise the priority of this disease, and should consider implementing a campaign to raise awareness and melioidosis prevention countrywide. |
Pulmonary toxicity and gene expression changes in response to whole-body inhalation exposure to multi-walled carbon nanotubes in rats
Sager TM , Umbright CM , Mustafa GM , Roberts JR , Orandle MS , Cumpston JL , McKinney WG , Boots T , Kashon ML , Joseph P . Inhal Toxicol 2022 34 1-19 Purpose: To investigate the molecular mechanisms underlying the pulmonary toxicity induced by exposure to one form of multi-walled carbon nanotubes (MWCNT-7).Materials and methods: Rats were exposed, by whole-body inhalation, to air or an aerosol containing MWCNT-7 particles at target cumulative doses (concentration x time) ranging from 22.5 to 180 (mg/m(3))h over a three-day (6 hours/day) period and toxicity and global gene expression profiles were determined in the lungs.Results: MWCNT-7 particles, associated with alveolar macrophages (AMs), were detected in rat lungs following the exposure. Mild to moderate lung pathological changes consisting of increased cellularity, thickening of the alveolar wall, alveolitis, fibrosis, and granuloma formation were detected. Bronchoalveolar lavage (BAL) toxicity parameters such as lactate dehydrogenase activity, number of AMs and polymorphonuclear leukocytes (PMNs), intracellular oxidant generation by phagocytes, and levels of cytokines were significantly (p < 0.05) increased in response to exposure to MWCNT-7. Global gene expression profiling identified several significantly differentially expressed genes (fold change >1.5 and FDR p value <0.05) in all the MWCNT-7 exposed rats. Bioinformatic analysis of the gene expression data identified significant enrichment of several diseases/biological function categories (for example, cancer, leukocyte migration, inflammatory response, mitosis, and movement of phagocytes) and canonical pathways (for example, kinetochore metaphase signaling pathway, granulocyte and agranulocyte adhesion and diapedesis, acute phase response, and LXR/RXR activation). The alterations in the lung toxicity parameters and gene expression changes exhibited a dose-response to the MWCNT exposure.Conclusions: Taken together, the data provided insights into the molecular mechanisms underlying the pulmonary toxicity induced by inhalation exposure of rats to MWCNT-7. |
Developing a solution for nasal and olfactory transport of nanomaterials
O'Connell RC , Dodd TM , Clingerman SM , Fluharty KL , Coyle J , Stueckle TA , Porter DW , Bowers L , Stefaniak AB , Knepp AK , Derk R , Wolfarth M , Mercer RR , Boots TE , Sriram K , Hubbs AF . Toxicol Pathol 2022 50 (3) 1926233221089209 With advances in nanotechnology, engineered nanomaterial applications are a rapidly growing sector of the economy. Some nanomaterials can reach the brain through nose-to-brain transport. This transport creates concern for potential neurotoxicity of insoluble nanomaterials and a need for toxicity screening tests that detect nose-to-brain transport. Such tests can involve intranasal instillation of aqueous suspensions of nanomaterials in dispersion media that limit particle agglomeration. Unfortunately, protein and some elements in existing dispersion media are suboptimal for potential nose-to-brain transport of nanomaterials because olfactory transport has size- and ion-composition requirements. Therefore, we designed a protein-free dispersion media containing phospholipids and amino acids in an isotonic balanced electrolyte solution, a solution for nasal and olfactory transport (SNOT). SNOT disperses hexagonal boron nitride nanomaterials with a peak particle diameter below 100 nm. In addition, multiwalled carbon nanotubes (MWCNTs) in an established dispersion medium, when diluted with SNOT, maintain dispersion with reduced albumin concentration. Using stereomicroscopy and microscopic examination of plastic sections, dextran dyes dispersed in SNOT are demonstrated in the neuroepithelium of the nose and olfactory bulb of B6;129P2-Omp(tm3Mom)/MomJ mice after intranasal instillation in SNOT. These findings support the potential for SNOT to disperse nanomaterials in a manner permitting nose-to-brain transport for neurotoxicity studies. |
Reduction of exposure to simulated respiratory aerosols using ventilation, physical distancing, and universal masking.
Coyle JP , Derk RC , Lindsley WG , Boots T , Blachere FM , Reynolds JS , McKinney WG , Sinsel EW , Lemons AR , Beezhold DH , Noti JD . Indoor Air 2022 32 (2) e12987 To limit community spread of SARS-CoV-2, CDC recommends universal masking indoors, maintaining 1.8 m of physical distancing, adequate ventilation, and avoiding crowded indoor spaces. Several studies have examined the independent influence of each control strategy in mitigating transmission in isolation, yet controls are often implemented concomitantly within an indoor environment. To address the influence of physical distancing, universal masking, and ventilation on very fine respiratory droplets and aerosol particle exposure, a simulator that coughed and exhaled aerosols (the source) and a second breathing simulator (the recipient) were placed in an exposure chamber. When controlling for the other two mitigation strategies, universal masking with 3-ply cotton masks reduced exposure to 0.3-3 µm coughed and exhaled aerosol particles by >77% compared to unmasked tests, whereas physical distancing (0.9 or 1.8 m) significantly changed exposure to cough but not exhaled aerosols. The effectiveness of ventilation depended upon the respiratory activity, that is, coughing or breathing, as well as the duration of exposure time. Our results demonstrate that a layered mitigation strategy approach of administrative and engineering controls can reduce personal inhalation exposure to potentially infectious very fine respiratory droplets and aerosol particles within an indoor environment. |
Efficacy of Ventilation, HEPA Air Cleaners, Universal Masking, and Physical Distancing for Reducing Exposure to Simulated Exhaled Aerosols in a Meeting Room.
Coyle JP , Derk RC , Lindsley WG , Blachere FM , Boots T , Lemons AR , Martin SBJr , Mead KR , Fotta SA , Reynolds JS , McKinney WG , Sinsel EW , Beezhold DH , Noti JD . Viruses 2021 13 (12) There is strong evidence associating the indoor environment with transmission of SARS-CoV-2, the virus that causes COVID-19. SARS-CoV-2 can spread by exposure to droplets and very fine aerosol particles from respiratory fluids that are released by infected persons. Layered mitigation strategies, including but not limited to maintaining physical distancing, adequate ventilation, universal masking, avoiding overcrowding, and vaccination, have shown to be effective in reducing the spread of SARS-CoV-2 within the indoor environment. Here, we examine the effect of mitigation strategies on reducing the risk of exposure to simulated respiratory aerosol particles within a classroom-style meeting room. To quantify exposure of uninfected individuals (Recipients), surrogate respiratory aerosol particles were generated by a breathing simulator with a headform (Source) that mimicked breath exhalations. Recipients, represented by three breathing simulators with manikin headforms, were placed in a meeting room and affixed with optical particle counters to measure 0.3-3 µm aerosol particles. Universal masking of all breathing simulators with a 3-ply cotton mask reduced aerosol exposure by 50% or more compared to scenarios with simulators unmasked. While evaluating the effect of Source placement, Recipients had the highest exposure at 0.9 m in a face-to-face orientation. Ventilation reduced exposure by approximately 5% per unit increase in air change per hour (ACH), irrespective of whether increases in ACH were by the HVAC system or portable HEPA air cleaners. The results demonstrate that mitigation strategies, such as universal masking and increasing ventilation, reduce personal exposure to respiratory aerosols within a meeting room. While universal masking remains a key component of a layered mitigation strategy of exposure reduction, increasing ventilation via system HVAC or portable HEPA air cleaners further reduces exposure. |
Face mask fit modifications that improve source control performance.
Blachere FM , Lemons AR , Coyle JP , Derk RC , Lindsley WG , Beezhold DH , Woodfork K , Duling MG , Boutin B , Boots T , Harris JR , Nurkiewicz T , Noti JD . Am J Infect Control 2021 50 (2) 133-140 BACKGROUND: During the COVID-19 pandemic, face masks are used as source control devices to reduce the expulsion of respiratory aerosols from infected people. Modifications such as mask braces, earloop straps, knotting and tucking, and double masking have been proposed to improve mask fit however the data on source control are limited. METHODS: The effectiveness of mask fit modifications was determined by conducting fit tests on human subjects and simulator manikins and by performing simulated coughs and exhalations using a source control measurement system. RESULTS: Medical masks without modification blocked ≥56% of cough aerosols and ≥42% of exhaled aerosols. Modifying fit by crossing the earloops or placing a bracket under the mask did not increase performance, while using earloop toggles, an earloop strap, and knotting and tucking the mask increased performance. The most effective modifications for improving source control performance were double masking and using a mask brace. Placing a cloth mask over a medical mask blocked ≥85% of cough aerosols and ≥91% of exhaled aerosols. Placing a brace over a medical mask blocked ≥95% of cough aerosols and ≥99% of exhaled aerosols. CONCLUSIONS: Fit modifications can greatly improve the performance of face masks as source control devices for respiratory aerosols. |
Effects of E-cigarette flavoring chemicals on human macrophages and bronchial epithelial cells
Morris AM , Leonard SS , Fowles JR , Boots TE , Mnatsakanova A , Attfield KR . Int J Environ Res Public Health 2021 18 (21) E-cigarettes utilize a wide range of flavoring chemicals with respiratory health effects that are not well understood. In this study, we used pulmonary-associated cell lines to assess the in vitro cytotoxic effects of 30 flavoring chemicals. Human bronchial epithelial cells (BEAS-2B) and both naïve and activated macrophages (THP-1) were treated with 10, 100, and 1000 µM of flavoring chemicals and analyzed for changes in viability, cell membrane damage, reactive oxygen species (ROS) production, and inflammatory cytokine release. Viability was unaffected for all chemicals at the 10 and 100 µM concentrations. At 1000 µM, the greatest reductions in viability were seen with decanal, hexanal, nonanal, cinnamaldehyde, eugenol, vanillin, alpha-pinene, eugenol, and limo-nene. High amounts of ROS were elicited by vanillin, ethyl maltol, and the diketones (2,3-pentane-dione, 2,3-heptanedione, and 2,3-hexanedione) from both cell lines. Naïve THP-1 cells produced significantly elevated levels of IL-1β, IL-8, and TNF-α when exposed to ethyl maltol and hexanal. Activated THP-1 cells released increased IL-1β and TNF-α when exposed to ethyl maltol, but many flavoring chemicals had an apparent suppressive effect on inflammatory cytokines released by activated macrophages, some with varying degrees of accompanying cytotoxicity. The diketones, L-carvone, and linalool suppressed cytokine release in the absence of cytotoxicity. These findings pro-vide insight into lung cell cytotoxicity and inflammatory cytokine release in response to flavorings commonly used in e-cigarettes. © 2021 by the authors. Licensee MDPI, Basel, Switzerland. |
Efficacy of Portable Air Cleaners and Masking for Reducing Indoor Exposure to Simulated Exhaled SARS-CoV-2 Aerosols - United States, 2021.
Lindsley WG , Derk RC , Coyle JP , Martin SBJr , Mead KR , Blachere FM , Beezhold DH , Brooks JT , Boots T , Noti JD . MMWR Morb Mortal Wkly Rep 2021 70 (27) 972-976 SARS-CoV-2, the virus that causes COVID-19, can be spread by exposure to droplets and aerosols of respiratory fluids that are released by infected persons when they cough, sing, talk, or exhale. To reduce indoor transmission of SARS-CoV-2 between persons, CDC recommends measures including physical distancing, universal masking (the use of face masks in public places by everyone who is not fully vaccinated), and increased room ventilation (1). Ventilation systems can be supplemented with portable high efficiency particulate air (HEPA) cleaners* to reduce the number of infectious particles in the air and provide enhanced protection from transmission between persons (2); two recent reports found that HEPA air cleaners in classrooms could reduce overall aerosol particle concentrations by ≥80% within 30 minutes (3,4). To investigate the effectiveness of portable HEPA air cleaners and universal masking at reducing exposure to exhaled aerosol particles, the investigation team used respiratory simulators to mimic a person with COVID-19 and other, uninfected persons in a conference room. The addition of two HEPA air cleaners that met the Environmental Protection Agency (EPA)-recommended clean air delivery rate (CADR) (5) reduced overall exposure to simulated exhaled aerosol particles by up to 65% without universal masking. Without the HEPA air cleaners, universal masking reduced the combined mean aerosol concentration by 72%. The combination of the two HEPA air cleaners and universal masking reduced overall exposure by up to 90%. The HEPA air cleaners were most effective when they were close to the aerosol source. These findings suggest that portable HEPA air cleaners can reduce exposure to SARS-CoV-2 aerosols in indoor environments, with greater reductions in exposure occurring when used in combination with universal masking. |
A comparison of performance metrics for cloth masks as source control devices for simulated cough and exhalation aerosols.
Lindsley WG , Blachere FM , Beezhold DH , Law BF , Derk RC , Hettick JM , Woodfork K , Goldsmith WT , Harris JR , Duling MG , Boutin B , Nurkiewicz T , Boots T , Coyle J , Noti JD . Aerosol Sci Technol 2021 55 (10) 1125-1142 Universal mask wearing is recommended to help control the spread of COVID-19. Masks reduce the expulsion of aerosols of respiratory fluids into the environment (called source control) and offer some protection to the wearer. Masks are often characterized using filtration efficiency, airflow resistance, and manikin or human fit factors, which are standard metrics used for personal protective devices. However, none of these metrics are direct measurements of how effectively a mask blocks coughed and exhaled aerosols. We studied the source control performance of 15 cloth masks (face masks, neck gaiters, and bandanas), two medical masks, and two N95 filtering facepiece respirators by measuring their ability to block aerosols ≤7 µm expelled during simulated coughing and exhalation (called source control collection efficiency). These measurements were compared with filtration efficiencies, airflow resistances, and fit factors measured on manikin headforms and humans. Collection efficiencies for the cloth masks ranged from 17% to 71% for coughing and 35% to 66% for exhalation. Filtration efficiencies for the cloth masks ranged from 1.4% to 98%, while the fit factors were 1.3 to 7.4 on headforms and 1.0 to 4.0 on human subjects. The Spearman’s rank correlation coefficients between the source control collection efficiencies and the standard metrics ranged from 0.03 to 0.68 and were significant in all but two cases. However, none of the standard metrics were strongly correlated with source control performance. A better understanding of the relationships between source control collection efficiency, filtration efficiency, airflow resistance, and fit factor is needed. ©, This work was authored as part of the Contributor's official duties as an Employee of the United States Government and is therefore a work of the United States Government. In accordance with 17 USC. 105, no copyright protection is available for such works under US Law. |
Efficacy of universal masking for source control and personal protection from simulated cough and exhaled aerosols in a room
Lindsley WG , Beezhold DH , Coyle J , Derk RC , Blachere FM , Boots T , Reynolds JS , McKinney WG , Sinsel E , Noti JD . J Occup Environ Hyg 2021 18 (8) 1-15 Face masks reduce the expulsion of respiratory aerosols produced during coughs and exhalations ("source control"). Factors such as the directions in which people are facing (orientation) and separation distance also affect aerosol dispersion. However, it is not clear how the combined effects of masking, orientation, and distance affect the exposure of individuals to respiratory aerosols in indoor spaces. We placed a respiratory aerosol simulator ("source") and a breathing simulator ("recipient") in a 3 m x 3 m chamber and measured aerosol concentrations for different combinations of masking, orientation, and separation distance. When the simulators were front-to-front during coughing, masks reduced the 15-minute mean aerosol concentration at the recipient by 92% at 0.9 and 1.8 m separation. When the simulators were side-by-side, masks reduced the concentration by 81% at 0.9 m and 78% at 1.8 m. During breathing, masks reduced the aerosol concentration by 66% when front-to-front and 76% when side-by-side at 0.9 m. Similar results were seen at 1.8 m. When the simulators were unmasked, changing the orientations from front-to-front to side-by-side reduced the cough aerosol concentration by 59% at 0.9 m and 60% at 1.8 m. When both simulators were masked, changing the orientations did not significantly change the concentration at either distance during coughing or breathing. Increasing the distance between the simulators from 0.9 m to 1.8 m during coughing reduced the aerosol concentration by 25% when no masks were worn but had little effect when both simulators were masked. During breathing, when neither simulator was masked, increasing the separation reduced the concentration by 13%, which approached significance, while the change was not significant when both source and recipient were masked. Our results show that universal masking reduces exposure to respiratory aerosol particles regardless of the orientation and separation distance between the source and recipient. |
Utilizing literature-based rodent toxicology data to derive potency estimates for quantitative risk assessment
Boots TE , Kogel AM , Drew NM , Kuempel ED . Nanotoxicology 2021 15 (6) 1-21 Evaluating the potential occupational health risk of engineered nanomaterials is an ongoing need. The objective of this meta-analysis, which consisted of 36 studies containing 86 materials, was to assess the availability of published in vivo rodent pulmonary toxicity data for a variety of nanoscale and microscale materials and to derive potency estimates via benchmark dose modeling. Additionally, the potency estimates based on particle mass lung dose associated with acute pulmonary inflammation were used to group materials based on toxicity. The commonalities among the physicochemical properties of the materials in each group were also explored. This exploration found that a material's potency tended to be associated primarily with the material class based on chemical composition and form (e.g. carbon nanotubes, TiO(2), ZnO) rather than with particular physicochemical properties. Limitations in the data available precluded a more extensive analysis of these associations. Issues such as data reporting and appropriate experimental design for use in quantitative risk assessment are the main reasons publications were excluded from these analyses and are discussed. |
Physicochemical characterization and genotoxicity of the broad class of carbon nanotubes and nanofibers used or produced in U.S. facilities.
Fraser K , Kodali V , Yanamala N , Birch ME , Cena L , Casuccio G , Bunker K , Lersch TL , Evans DE , Stefaniak A , Hammer MA , Kashon ML , Boots T , Eye T , Hubczak J , Friend SA , Dahm M , Schubauer-Berigan MK , Siegrist K , Lowry D , Bauer AK , Sargent LM , Erdely A . Part Fibre Toxicol 2020 17 (1) 62 ![]() BACKGROUND: Carbon nanotubes and nanofibers (CNT/F) have known toxicity but simultaneous comparative studies of the broad material class, especially those with a larger diameter, with computational analyses linking toxicity to their fundamental material characteristics was lacking. It was unclear if all CNT/F confer similar toxicity, in particular, genotoxicity. Nine CNT/F (MW #1-7 and CNF #1-2), commonly found in exposure assessment studies of U.S. facilities, were evaluated with reported diameters ranging from 6 to 150 nm. All materials were extensively characterized to include distributions of physical dimensions and prevalence of bundled agglomerates. Human bronchial epithelial cells were exposed to the nine CNT/F (0-24 μg/ml) to determine cell viability, inflammation, cellular oxidative stress, micronuclei formation, and DNA double-strand breakage. Computational modeling was used to understand various permutations of physicochemical characteristics and toxicity outcomes. RESULTS: Analyses of the CNT/F physicochemical characteristics illustrate that using detailed distributions of physical dimensions provided a more consistent grouping of CNT/F compared to using particle dimension means alone. In fact, analysis of binning of nominal tube physical dimensions alone produced a similar grouping as all characterization parameters together. All materials induced epithelial cell toxicity and micronuclei formation within the dose range tested. Cellular oxidative stress, DNA double strand breaks, and micronuclei formation consistently clustered together and with larger physical CNT/F dimensions and agglomerate characteristics but were distinct from inflammatory protein changes. Larger nominal tube diameters, greater lengths, and bundled agglomerate characteristics were associated with greater severity of effect. The portion of tubes with greater nominal length and larger diameters within a sample was not the majority in number, meaning a smaller percentage of tubes with these characteristics was sufficient to increase toxicity. Many of the traditional physicochemical characteristics including surface area, density, impurities, and dustiness did not cluster with the toxicity outcomes. CONCLUSION: Distributions of physical dimensions provided more consistent grouping of CNT/F with respect to toxicity outcomes compared to means only. All CNT/F induced some level of genotoxicity in human epithelial cells. The severity of toxicity was dependent on the sample containing a proportion of tubes with greater nominal lengths and diameters. |
Effects of metatarsal work boots on gait during level and inclined walking
Kocher LM , Pollard JP , Whitson AE , Nasarwanji MF . J Appl Biomech 2020 1-8 Footwear plays an important role in worker safety. Work boots with safety toes are often utilized at mine sites to protect workers from hazards. Increasingly, mining operations require metatarsal guards in addition to safety toe protection in boots. While these guards provide additional protection, the impact of metatarsal guards on gait are unknown. This study aimed to measure the effects of 4 safety work boots, steel toe, and steel toe with metatarsal protection in wader- and hiker-style boots, on level and inclined walking gait characteristics, during ascent and descent. A total of 10 participants completed this study. A motion capture system measured kinematics that allowed for the calculation of key gait parameters. Results indicated that gait parameters changed due to incline, similar to previous literature. Wader-style work boots reduced ankle range of motion when ascending an incline. Hip, knee, and ankle ranges of motion were also reduced during descent for this style of boot. Wader-style boots with metatarsal guards led to the smallest ankle range of motion when descending an inclined walkway. From these results, it is likely that boot style affects gait parameters and may impact a miner's risk for slips, trips, or falls. |
Effect of a high fat diet and occupational exposure in different rat strains on lung and systemic responses: examination of the exposome in an animal model
Antonini JM , Kodali V , Shoeb M , Kashon M , Roach KA , Boyce G , Meighan T , Stone S , McKinney W , Boots T , Roberts JR , Zeidler-Erdely PC , Erdely A . Toxicol Sci 2019 174 (1) 100-111 The exposome is the measure of all exposures of an individual in a lifetime and how those exposures relate to health. The goal was to examine an experimental model integrating multiple aspects of the exposome by collecting biological samples during critical life stages of an exposed animal that are applicable to worker populations. Genetic contributions were assessed using strains of male rats with different genetic backgrounds [Fischer-344, Sprague-Dawley, Brown-Norway] maintained on a regular (REG) or high fat (HF) diet for 24 wk. At wk 7 during diet maintenance, groups of rats from each strain were exposed to stainless steel welding fume (WF; 20 mg/m3 x 3 hr/d x 4 d/wk x 5 wk) or air until wk 12, at which time some animals were euthanized. A separate set of rats from each strain were allowed to recover from WF exposure until the end of the 24 wk period. Bronchoalveolar lavage fluid and serum were collected at 7, 12, and 24 wk to assess general health indices. Depending on animal strain, WF exposure and HF diet together worsened kidney toxicity as well as altered different serum enzymes and proteins. Diet had minimal interaction with WF exposure for pulmonary toxicity endpoints. Experimental factors of diet, exposure, and strain were all important, depending on the health outcome measured. Exposure had the most significant influence related to pulmonary responses. Strain was the most significant contributor regarding the other health indices examined, indicating that genetic differences possibly drive the exposome effect in each strain. |
Personal protective equipment for preventing highly infectious diseases due to exposure to contaminated body fluids in healthcare staff
Verbeek JH , Rajamaki B , Ijaz S , Tikka C , Ruotsalainen JH , Edmond MB , Sauni R , Kilinc Balci FS . Cochrane Database Syst Rev 2019 7 (7) CD011621 BACKGROUND: In epidemics of highly infectious diseases, such as Ebola Virus Disease (EVD) or Severe Acute Respiratory Syndrome (SARS), healthcare workers (HCW) are at much greater risk of infection than the general population, due to their contact with patients' contaminated body fluids. Contact precautions by means of personal protective equipment (PPE) can reduce the risk. It is unclear which type of PPE protects best, what is the best way to remove PPE, and how to make sure HCW use PPE as instructed. OBJECTIVES: To evaluate which type of full body PPE and which method of donning or doffing PPE have the least risk of self-contamination or infection for HCW, and which training methods increase compliance with PPE protocols. SEARCH METHODS: We searched MEDLINE (PubMed up to 15 July 2018), Cochrane Central Register of Trials (CENTRAL up to 18 June 2019), Scopus (Scopus 18 June 2019), CINAHL (EBSCOhost 31 July 2018), and OSH-Update (up to 31 December 2018). We also screened reference lists of included trials and relevant reviews, and contacted NGOs and manufacturers of PPE. SELECTION CRITERIA: We included all controlled studies that compared the effects of PPE used by HCW exposed to highly infectious diseases with serious consequences, such as Ebola or SARS, on the risk of infection, contamination, or noncompliance with protocols. This included studies that used simulated contamination with fluorescent markers or a non-pathogenic virus.We also included studies that compared the effect of various ways of donning or doffing PPE, and the effects of training in PPE use on the same outcomes. DATA COLLECTION AND ANALYSIS: Two authors independently selected studies, extracted data and assessed risk of bias in included trials. We planned to perform meta-analyses but did not find sufficiently similar studies to combine their results. MAIN RESULTS: We included 17 studies with 1950 participants evaluating 21 interventions. Ten studies are Randomised Controlled Trials (RCTs), one is a quasi RCT and six have a non-randomised controlled design. Two studies are awaiting assessment.Ten studies compared types of PPE but only six of these reported sufficient data. Six studies compared different types of donning and doffing and three studies evaluated different types of training. Fifteen studies used simulated exposure with fluorescent markers or harmless viruses. In simulation studies, contamination rates varied from 10% to 100% of participants for all types of PPE. In one study HCW were exposed to Ebola and in another to SARS.Evidence for all outcomes is based on single studies and is very low quality.Different types of PPEPPE made of more breathable material may not lead to more contamination spots on the trunk (Mean Difference (MD) 1.60 (95% Confidence Interval (CI) -0.15 to 3.35) than more water repellent material but may have greater user satisfaction (MD -0.46; 95% CI -0.84 to -0.08, scale of 1 to 5).Gowns may protect better against contamination than aprons (MD large patches -1.36 95% CI -1.78 to -0.94).The use of a powered air-purifying respirator may protect better than a simple ensemble of PPE without such respirator (Relative Risk (RR) 0.27; 95% CI 0.17 to 0.43).Five different PPE ensembles (such as gown vs. coverall, boots with or without covers, hood vs. cap, length and number of gloves) were evaluated in one study, but there were no event data available for compared groups.Alterations to PPE design may lead to less contamination such as added tabs to grab masks (RR 0.33; 95% CI 0.14 to 0.80) or gloves (RR 0.22 95% CI 0.15 to 0.31), a sealed gown and glove combination (RR 0.27; 95% CI 0.09 to 0.78), or a better fitting gown around the neck, wrists and hands (RR 0.08; 95% CI 0.01 to 0.55) compared to standard PPE.Different methods of donning and doffing proceduresDouble gloving may lead to less contamination compared to single gloving (RR 0.36; 95% CI 0.16 to 0.78).Following CDC recommendations for doffing may lead to less contamination compared to no guidance (MD small patches -5.44; 95% CI -7.43 to -3.45).Alcohol-based hand rub used during the doffing process may not lead to less contamination than the use of a hypochlorite based solution (MD 4.00; 95% CI 0.47 to 34.24).Additional spoken instruction may lead to fewer errors in doffing (MD -0.9, 95% CI -1.4 to -0.4).Different types of trainingThe use of additional computer simulation may lead to fewer errors in doffing (MD -1.2, 95% CI -1.6 to -0.7).A video lecture on donning PPE may lead to better skills scores (MD 30.70; 95% CI 20.14,41.26) than a traditional lecture.Face to face instruction may reduce noncompliance with doffing guidance more (OR 0.45; 95% CI 0.21 to 0.98) than providing folders or videos only.There were no studies on effects of training in the long term or on resource use.The quality of the evidence is very low for all comparisons because of high risk of bias in all studies, indirectness of evidence, and small numbers of participants. AUTHORS' CONCLUSIONS: We found very low quality evidence that more breathable types of PPE may not lead to more contamination, but may have greater user satisfaction. Alterations to PPE, such as tabs to grab may decrease contamination. Double gloving, following CDC doffing guidance, and spoken instructions during doffing may reduce contamination and increase compliance. Face-to-face training in PPE use may reduce errors more than video or folder based training. Because data come from single small studies with high risk of bias, we are uncertain about the estimates of effects.We still need randomised controlled trials to find out which training works best in the long term. We need better simulation studies conducted with several dozen participants to find out which PPE protects best, and what is the safest way to remove PPE. Consensus on the best way to conduct simulation of exposure and assessment of outcome is urgently needed. HCW exposed to highly infectious diseases should have their use of PPE registered and should be prospectively followed for their risk of infection in the field. |
Hurricane-associated mold exposures among patients at risk for invasive mold infections after Hurricane Harvey - Houston, Texas, 2017
Chow NA , Toda M , Pennington AF , Anassi E , Atmar RL , Cox-Ganser JM , Da Silva J , Garcia B , Kontoyiannis DP , Ostrosky-Zeichner L , Leining LM , McCarty J , Al Mohajer M , Murthy BP , Park JH , Schulte J , Shuford JA , Skrobarcek KA , Solomon S , Strysko J , Chiller TM , Jackson BR , Chew GL , Beer KD . MMWR Morb Mortal Wkly Rep 2019 68 (21) 469-473 In August 2017, Hurricane Harvey caused unprecedented flooding and devastation to the Houston metropolitan area (1). Mold exposure was a serious concern because investigations after Hurricanes Katrina and Rita (2005) had documented extensive mold growth in flood-damaged homes (2,3). Because mold exposure can cause serious illnesses known as invasive mold infections (4,5), and immunosuppressed persons are at high risk for these infections (6,7), several federal agencies recommend that immunosuppressed persons avoid mold-contaminated sites (8,9). To assess the extent of exposure to mold and flood-damaged areas among persons at high risk for invasive mold infections after Hurricane Harvey, CDC and Texas health officials conducted a survey among 103 immunosuppressed residents in Houston. Approximately half of the participants (50) engaged in cleanup of mold and water-damaged areas; these activities included heavy cleanup (23), such as removing furniture or removing drywall, or light cleanup (27), such as wiping down walls or retrieving personal items. Among immunosuppressed persons who performed heavy cleanup, 43% reported wearing a respirator, as did 8% who performed light cleanup. One participant reported wearing all personal protective equipment (PPE) recommended for otherwise healthy persons (i.e., respirator, boots, goggles, and gloves). Immunosuppressed residents who are at high risk for invasive mold infections were exposed to mold and flood-damaged areas after Hurricane Harvey; recommendations from health care providers to avoid exposure to mold and flood-damaged areas could mitigate the risk to immunosuppressed persons. |
Adherence to Ebola-specific malaria case management guidelines at health facilities in Guinea during the West African Ebola epidemic
Hennessee I , Guilavogui T , Camara A , Halsey ES , Marston B , McFarland D , Freeman M , Plucinski MM . Malar J 2018 17 (1) 230 BACKGROUND: Malaria case management in the context of the 2014-2016 West African Ebola virus disease (EVD) epidemic was complicated by a similar initial clinical presentation of the two diseases. In September 2014, the World Health Organization (WHO) released recommendations titled, "Guidance on temporary malaria control measures in Ebola-affected countries", which aimed at reducing the risk of EVD transmission and improving malaria outcomes. This guidance recommended malaria diagnostic testing of fever cases only if adequate personal protective equipment (PPE) was available, defined as examination gloves, face shield, disposable gown, boots, and head cover; otherwise presumptive anti-malarial treatment was recommended. The extent to which health workers adhered to these guidelines in affected countries has not been assessed. METHODS: A cross-sectional survey was conducted in 118 health units in Guinea in November 2014 to produce a representative and probabilistic sample of health facilities and patients. Adherence to the EVD-specific malaria case management guidelines during the height of the EVD epidemic was assessed. Associations between case management practices and possible determinants were calculated using multivariate logistic regression, controlling for expected confounders and the complex sample design. RESULTS: Most (78%) facilities reported availability of examination gloves, but adequate PPE was available at only 27% of facilities. Only 28% of febrile patients received correct malaria case management per the WHO temporary malaria case management guidelines. The most common error was diagnostic testing in the absence of adequate PPE (45% of febrile patients), followed by no presumptive treatment in the absence of adequate PPE (14%). Having had a report of an EVD case at a health facility and health worker-reported participation in EVD-specific malaria trainings were associated with lower odds of diagnostic testing and higher odds of presumptive treatment. CONCLUSIONS: Adherence to guidance on malaria case management in EVD-affected countries was low at the height of the EVD epidemic in Guinea, and there was substantial malaria diagnostic testing in the absence of adequate PPE, which could have contributed to increased EVD transmission in the healthcare setting. Conversely, low presumptive treatment when diagnostic tests were not performed may have led to additional morbidity and mortality among malaria positive patients. National malaria control programs may consider preparing contingency plans for future implementation of temporary changes to malaria case management guidelines to facilitate uptake by health workers. Additional training on standard and transmission-based precautions should help health workers understand how to protect themselves in the face of emerging and unknown pathogens. |
Ebola infection control in Sierra Leonean health clinics: a large cross-agency cooperative project
Levy B , Rao CY , Miller L , Kennedy N , Adams M , Davis R , Hastings L , Kabano A , Bennett SD , Sesay M . Am J Infect Control 2015 43 (7) 752-5 The Ebola virus disease outbreak occurring in West Africa has resulted in at least 199 cases of Ebola in Sierra Leonean health care workers, many as a result of transmission occurring in health facilities. The Ministry of Health and Sanitation of Sierra Leone recognized that improvements in infection prevention and control (IPC) were necessary at all levels of health care delivery. To this end, the U.S. Centers for Disease Control and Prevention, United Nations Children's Fund, and multiple nongovernmental organizations implemented a national IPC training program in 1,200 peripheral health units (PHUs) in Sierra Leone. A tiered training of trainers program was used. Trainers conducted multiday trainings at PHUs and coordinated the delivery of personal protective equipment (gloves, gowns, masks, boots) and infection control supplies (chlorine, buckets, disposable rags, etc) to all PHU staff. Under the ongoing project, 4,264 health workers have already been trained, and 98% of PHUs have received their first shipment of supplies. |
A review of mine rescue ensembles for underground coal mining in the United States
Kilinc FS , Monaghan WD , Powell JB . J Eng Fiber Fabr 2014 9 (1) 174-185 The mining industry is among the top ten industries nationwide with high occupational injury and fatality rates, and mine rescue response may be considered one of the most hazardous activities in mining operations. In the aftermath of an underground mine fire, explosion or water inundation, specially equipped and trained teams have been sent underground to fight fires, rescue entrapped miners, test atmospheric conditions, investigate the causes of the disaster, or recover the dead. Special personal protective ensembles are used by the team members to improve the protection of rescuers against the hazards of mine rescue and recovery. Personal protective ensembles used by mine rescue teams consist of helmet, cap lamp, hood, gloves, protective clothing, boots, kneepads, facemask, breathing apparatus, belt, and suspenders. While improved technology such as wireless warning and communication systems, lifeline pulleys, and lighted vests have been developed for mine rescuers over the last 100 years, recent research in this area of personal protective ensembles has been minimal due to the trending of reduced exposure of rescue workers. In recent years, the exposure of mine rescue teams to hazardous situations has been changing. However, it is vital that members of the teams have the capability and proper protection to immediately respond to a wide range of hazardous situations. Currently, there are no minimum requirements, best practice documents, or nationally recognized consensus standards for protective clothing used by mine rescue teams in the United States (U.S.). The following review provides a summary of potential issues that can be addressed by rescue teams and industry to improve potential exposures to rescue team members should a disaster situation occur. However, the continued trending in the mining industry toward non-exposure to potential hazards for rescue workers should continue to be the primary goal. To assist in continuing this trend, the mining industry and regulatory agencies have been more information regarding atmospheric conditions and other hazards before exposing rescue workers and others in the aftermath of a mine disaster. In light of some of the more recent mine rescuer fatalities such as the Crandall Canyon Mine and Jim Walters Resources in the past years, the direction of reducing exposure is preferred. This review provides a historical perspective on ensembles used during mine rescue operations and summarizes environmental hazards, critical elements of mine rescue ensembles, and key problems with these elements. This study also identifies domains for improved mine rescue ensembles. Furthermore, field observations from several coal mine rescue teams were added to provide the information on the currently used mine rescue ensembles in the U.S. |
Effect of boot weight and sole flexibility on gait and physiological responses of firefighters in stepping over obstacles
Chiou SS , Turner N , Zwiener J , Weaver DL , Haskell WE . Hum Factors 2012 54 (3) 373-86 OBJECTIVE: The authors investigated the effect of boot weight and sole flexibility on spatiotemporal gait characteristics and physiological responses of firefighters in negotiating obstacles. BACKGROUND: Falls and overexertion are the leading causes of fire ground injuries and fatalities among firefighters. There have been few in-depth studies conducted to evaluate the risk factors of falls and overexertion associated with firefighter boots. METHOD: For the study, 13 female and 14 male firefighters, while wearing full turnout clothing and randomly assigned boots, walked for 5 min while stepping over obstacles. The independent variables included boot weight, sole flexibility, gender, and task duration. Spatiotemporal measures of foot trajectories and toe clearance were determined. Minute ventilation, oxygen consumption, carbon dioxide production, and heart rate were measured. RESULTS: Increased boot weight was found to significantly reduce trailing toe clearance when crossing the 30-cm obstacle. Significant increases in lateral displacement of the foot were found near the end of the 5-min walk compared with the beginning of the task Increased boot weight significantly increased oxygen consumption. There were significant decreases in oxygen consumption for more flexible soles. CONCLUSION: Firefighters were more likely to trip over obstacles when wearing heavier boots and after walking for a period of time. Boot weight affected metabolic variables (5% to 11% increases per 1-kg increase in boot weight), which were mitigated by sole flexibility (5% to 7% decrease for more flexible soles). APPLICATION: This study provides useful information for firefighters and boot manufacturers in boot selection and design for reducing falls and overexertion. |
Physiological effects of boot weight and design on men and women firefighters
Turner NL , Chiou S , Zwiener J , Weaver D , Spahr J . J Occup Environ Hyg 2010 7 (8) 477-82 The purpose of this study was to determine the effects of two leather (L1, L2) and two rubber (R1, R2) boots on firefighters' metabolic and respiratory variables during simulated firefighting tasks. Twenty-five men and 25 women, while wearing full turnout clothing, a 10.5-kg backpack, gloves, helmet, and one of four randomly assigned pairs of firefighter boots, walked for 6 min at 3 mph (4.8 km/hr) on a level treadmill while carrying a 9.5-kg hose and climbed a stair ergometer for 6 min at 45 steps per min without the hose. [Abstract truncated.] |
- Page last reviewed:Feb 1, 2024
- Page last updated:Jan 27, 2025
- Content source:
- Powered by CDC PHGKB Infrastructure